Product classification

Contact us

Product introduction

一. Technical characteristics

A. On a variety of materials with strong adhesion;

B. Using a thin PET as base material has good thermal transmittance;

C. Good electrical insulation;

D. Good high and low temperature resistance, weather resistance.

二. Adhesive tape Composition

A. Transparent PET type from the membrane (0.023mm) B.Acrylic adhesive (0.003mm)

C. PET transparent from the film (0.0045mm) D. Acrylic adhesive (0.003mm)

E. Transparent PET type from the membrane (0.075mm)

Adhesive type	Tape thickness(mm)	From the filmthickness(mm)	Product specifications(mm)
Acrylic acid	0.010	0.023/0.075	MAX 600mm

三. Main application: suitable for electronic products with thermal conductivity graphite sheet gum use

四. Technical parameters

In 23 ℃, 65%RH environment, 50mm wide release paper and glue do type T dissection.

五. Retention period

The products shall be kept for half a year, avoid direct sunlight, high temperature (above 40℃, high humidity

(70%RH above)